Revision 1.0
04/2017
Document No. D120-011
Page
1
of
2
DH485 Router
Quick Start Guide
A-DH485R
REQUIRED SOFTWARE
The DH485 Router requires Aparian Slate software to setup and configure. The
software installation can be found at
www.aparian.com/software/slate
.
MODULE INSTALLATION
The DH485 Router requires input power of
10-28Vdc
. The wiring of the power
connector can be found in the wiring diagram below. The DH485 Router communicates
on both Ethernet and RS485 serial. The wiring of the RS485 connector can be found in
the wiring diagram below. The Ethernet connector should be wired according to
industry standards which can be found in the additional information section.
