AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 163 / 1248

Version 7.2 163 Mediant 500 MSBR
User's Manual 16. Security
user-defined period (configured by the ini file parameter, IDSAlarmClearPeriod)
during which no thresholds have been crossed. However, this "quiet" period must
be at least twice the 'Threshold Window' value (configured in Configuring IDS
Policies on page 156). For example, if you set IDSAlarmClearPeriod to 20 sec
and 'Threshold Window' to 15 sec, the IDSAlarmClearPeriod parameter is
ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The figure below displays an example of IDS alarms in the Active Alarms table
(Viewing Active Alarms on page 849). In this example, a Minor threshold alarm is
cleared and replaced by a Major threshold alarm:
Figure 16-7: IDS Alarms in Active Alarms Table

acIDSBlacklistNotification event: The device sends this event whenever an attacker
(remote host at IP address and/or port) is added to or removed from the blacklist.
You can also view IDS alarms through CLI:

To view all active IDS alarms:
# show voip ids active-alarm all

To view all IP addresses that have crossed the threshold for an active IDS alarm:
# show voip ids active-alarm match <IDS Match Policy ID> rule <IDS Rule ID>
The IP address is displayed only if the 'Threshold Scope' parameter is set to IP or
IP+Port; otherwise, only the alarm is displayed.

To view the blacklist:
# show voip ids blacklist active
For example:
Active blacklist entries:
10.33.5.110(NI:0) remaining 00h:00m:10s in blacklist
Where SI is the SIP Interface and NI is the network interface.
The device also sends IDS notifications and alarms in Syslog messages to a Syslog
server. This occurs only if you have configured Syslog (see Enabling Syslog on page 940).
An example of a Syslog message with IDS alarms and notifications is shown below:
Figure 16-8: Syslog Message Example with IDS Alarms and Notifications
The table below lists the Syslog text messages per malicious event:
Table 16-4: Types of Malicious Events and Syslog Text String
Reason Description Syslog String
Connection
Abuse TLS authentication failure abuse-tls-auth-fail