AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1202 / 1248

User's Manual 1202 Document #: LTRT-10375
Mediant 500 MSBR
SIP REFER messages with a Referred-By header.

This manipulation is done before regular IP-to-Tel source number
manipulation.

The parameter is applicable only to digital interfaces.
configure voip > gateway
manipulation settings >
swap-tel-to-ip-phone-num
[SwapTel2IPCalled&Calling
Numbers]
Global parameter enabling the device to swap the calling and called
numbers received from the Tel side (for Tel-to-IP calls).
You can also configure the feature per specific calls, using Tel Profiles
(TelProfile_SwapTelToIpPhoneNumbers). For a detailed description of
the parameter and for configuring the feature in the Tel Profiles table,
see Configuring Tel Profiles on page 440.
Note: If the feature is configured for a specific Tel Profile, the settings of
the global parameter is ignored for calls associated with the Tel Profile.
Add Prefix to Redirect
Number
add-pref-to-redir-nb
[Prefix2RedirectNumber]
Defines a string prefix that is added to the Redirect number received
from the Tel side. This prefix is added to the Redirect Number in the SIP
Diversion header.
The valid range is an 8-character string. By default, no value is defined.
Note: The parameter is applicable only to digital interfaces.
Add Number Plan and Type
to RPI Header
np-n-type-to-rpi-hdr
[AddTON2RPI]
Determines whether the TON/PLAN parameters are included in the
Remote-Party-ID (RPID) header.

[0] No

[1] Yes (default)
If the Remote-Party-ID header is enabled (EnableRPIHeader = 1) and
AddTON2RPI = 1, it's possible to configure the calling and called
number type and number plan using the Number Manipulation tables for
Tel-to-IP calls.
Source Manipulation Mode
configure voip > gateway
routing settings > src-
manipulation
[SourceManipulationMode]
Determines the SIP headers containing the source number after
manipulation:

[0] = (Default) The SIP From and P-Asserted-Identity headers
contain the source number after manipulation.

[1] = Only SIP From header contains the source number after
manipulation, while the P-Asserted-Identity header contains the
source number before manipulation.
Calling Name Manipulations IP-to-Tel Table
configure voip > gateway
manipulation calling-name-
map-ip2tel
[CallingNameMapIp2Tel]
Configures rules for manipulating the calling name (caller ID) in the
received SIP message for IP-to-Tel calls. This can include modifying or
removing the calling name. The format of this table ini file parameter is
as follows:
[ CallingNameMapIp2Tel ]
FORMAT CallingNameMapIp2Tel_Index =
CallingNameMapIp2Tel_ManipulationName,
CallingNameMapIp2Tel_DestinationPrefix,
CallingNameMapIp2Tel_SourcePrefix,
CallingNameMapIp2Tel_CallingNamePrefix,
CallingNameMapIp2Tel_SourceAddress,
CallingNameMapIp2Tel_RemoveFromLeft,
CallingNameMapIp2Tel_RemoveFromRight,
CallingNameMapIp2Tel_LeaveFromRight,
CallingNameMapIp2Tel_Prefix2Add,
CallingNameMapIp2Tel_Suffix2Add;
[ \CallingNameMapIp2Tel ]
For more information, see Configuring SIP Calling Name Manipulation
on page 530.