AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1099 / 1248

Version 7.2 1099 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
of the global parameter is ignored for calls associated with the Tel
Profile.
configure voip > sip-
definition settings >
replace-nb-sign-w-esc
[ReplaceNumberSignWith
EscapeChar]
Determines whether to replace the number sign (#) with the escape
character (%23) in outgoing SIP messages for Tel-to-IP calls.

[0] Disable (default).

[1] Enable = All number signs #, received in the dialed DTMF digits
are replaced in the outgoing SIP Request-URI and To headers
with the escape sign %23.
Note:

The parameter is applicable only if the parameter IsSpecialDigits is
set 1.

The parameter is applicable only to analog interfaces.
Special Digit
Representation
configure voip > gateway
dtmf-supp-service dtmf-
and-dialing > special-digit-
rep
[UseDigitForSpecialDTMF
]
Defines the representation for ‘special’ digits (‘*’ and ‘#’) that are used
for out-of-band DTMF signaling (using SIP INFO/NOTIFY).

[0] Special = (Default) Uses the strings ‘*’ and ‘#’.

[1] Numeric = Uses the numerical values 10 and 11.
isdn-keypad-mode
[ISDNKeypadMode]
Enables the device to send DTMF digits received in the called party
number from the IP side, as Keypad facility IE in ISDN
INFORMATION messages to PSTN.

[0] Don’t send = (Default) All digits are sent as DTMF to PSTN
(i.e., not sent as Keypad).

[1] During Call Establishment = DTMF digits after * or # (inclusive)
are sent as Keypad only during call establishment and call
disconnect. During an established call, all digits are sent as DTMF.

[2] Always = DTMF digits after * or # (inclusive) are always sent as
Keypad (call establishment, connect, and disconnect).
For more information, see Interworking Keypad DTMFs for SIP-to-
ISDN Calls on page 552.
Note:

This feature is not applicable to re-INVITE messages.

The parameter is applicable only to digital interfaces.
74.10.3 Digit Collection and Dial Plan Parameters
The digit collection and dial plan parameters are described in the table below.
Table 74-41: Digit Collection and Dial Plan Parameters
Parameter Description
Dial Plan Index
configure voip > gateway dtmf-
supp-service dtmf-and-dialing
> dial-plan-index
[DialPlanIndex]
Defines the Dial Plan index to use in the external Dial Plan file. The
Dial Plan file is loaded to the device as a .dat file (converted using
the DConvert utility). The Dial Plan index can be defined globally or
per Tel Profile.
The valid value range is 0 to 7, where 0 denotes PLAN1, 1 denotes
PLAN2, and so on. The default is -1, indicating that no Dial Plan
file is used.