AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1033 / 1248

Version 7.2 1033 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
Authentication
configure voip > gateway
analog authentication
[Authentication]
The table defines a user name and password for authenticating each
device port. The format of the ini file table parameter is as follows:
[Authentication]
FORMAT Authentication_Index = Authentication_UserId,
Authentication_UserPassword, Authentication_Module,
Authentication_Port;
[\Authentication]
Where,

Module = Module number, where 1 denotes the module in Slot 1

Port = Port number, where 1 denotes the Port 1 of the module
For example:
Authentication 1 = lee,1552,1,2; (user name "lee" with password 1552
for authenticating Port 2 of Module 1)
For a description o this table, see Configuring Authentication on page
601.
Note: The parameter is applicable only to analog interfaces.
Accounts Table
Accounts
configure voip > sip-
definition account
[Account]
Defines user accounts for registering and/or authenticating (digest)
Trunk Groups or IP Groups (e.g., an IP-PBX) with a Serving IP Group
(e.g., a registrar server).
The format of the ini file table parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroupName, Account_ServingIPGroupName,
Account_Username, Account_Password, Account_HostName,
Account_ContactUser, Account_Register, Account_RegistrarStickiness,
Account_RegistrarSearchMode,
Account_RegEventPackageSubscription, Account_ApplicationType;
[\Account]
For more information, see Configuring Registration Accounts on page
363.
Proxy Registration Parameters
Use Default Proxy
configure voip > sip-
definition settings >
enable-proxy
[IsProxyUsed]
Enables the use of Proxy Set ID 0 (for backward compatibility).

[0] No = (Default) Proxy Set 0 is not used.

[1] Yes = Proxy Set ID 0 is used.
Note:

The parameter must be used only for backward compatibility. If not
required for backward compatibility, make sure that the parameter is
disabled and use the Proxy Sets table for configuring all your Proxy
Sets (except for Proxy Set ID 0).

If you are not using a proxy server, you must configure routing rules
to route the call.

The parameter is applicable only to the Gateway application.
Proxy Name
configure voip > sip-
definition proxy-and-
registration > proxy-name
[ProxyName]
Defines the Home Proxy domain name. If specified, this name is used
as the Request-URI in REGISTER, INVITE and other SIP messages,
and as the host part of the To header in INVITE messages. If not
specified, the Proxy IP address is used instead.
The valid value is a string of up to 49 characters.