AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 709 / 1248

Version 7.2 709 Mediant 500 MSBR
User's Manual 38. SBC Manipulations
ReRoute IP Group
re-route-ip-group-name
[IPOutboundManipulatio
n_ReRouteIPGroupNam
e]
Defines the IP Group that initiated (sent) the SIP redirect response (e.g.,
3xx) or REFER message. The parameter is typically used for re-routing
requests (e.g., INVITEs) when interworking is required for SIP 3xx
redirect responses or REFER messages.
The default is Any (i.e., any IP Group).
Note:

The parameter functions together with the 'Call Trigger' parameter
(see below).

For more information on interworking of SIP 3xx redirect responses or
REFER messages, see Interworking SIP 3xx Redirect Responses on
page 644 and Interworking SIP REFER Messages on page 647,
respectively.
Action
Manipulated Item
manipulated-uri
[IPOutboundManipulatio
n_IsAdditionalManipulati
on]
Defines the element in the SIP message that you want manipulated.

[0] Source URI = (Default) Manipulates the source SIP Request-URI
user part.

[1] Destination URI = Manipulates the destination SIP Request-URI
user part.

[2] Calling Name = Manipulates the calling name in the SIP message.
Remove From Left
remove-from-left
[IPOutboundManipulatio
n_RemoveFromLeft]
Defines the number of digits to remove from the left of the manipulated
item prefix. For example, if you enter 3 and the user name is "john", the
new user name is "n".
Remove From Right
remove-from-right
[IPOutboundManipulatio
n_RemoveFromRight]
Defines the number of digits to remove from the right of the manipulated
item prefix. For example, if you enter 3 and the user name is "john", the
new user name is "j".
Leave From Right
leave-from-right
[IPOutboundManipulatio
n_LeaveFromRight]
Defines the number of digits to keep from the right of the manipulated
item.
Prefix to Add
prefix-to-add
[IPOutboundManipulatio
n_Prefix2Add]
Defines the number or string to add in the front of the manipulated item.
For example, if you enter 'user' and the user name is "john", the new
user name is "userjohn".
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI , you can configure the parameter to a string of up 49
characters. If you set the 'Manipulated Item' parameter to Calling Name ,
you can configure the parameter to a string of up 36 characters.
Suffix to Add
suffix-to-add
[IPOutboundManipulatio
n_Suffix2Add]
Defines the number or string to add at the end of the manipulated item.
For example, if you enter '01' and the user name is "john", the new user
name is "john01".
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI , you can configure the parameter to a string of up 49
characters. If you set the 'Manipulated Item' parameter to Calling Name ,
you can configure the parameter to a string of up 36 characters.