background image

Part No. 1.024.2320 Rev CA

June 2000

®

R

ELEASE

 N

OTES

S

UPER

S

TACK

®

 II R

EMOTE

 A

CCESS

 S

YSTEM

 1500

R

ELEASE

 2.5 

These Release Notes contain information for Release 2.5 of the 
SuperStack

®

 II Remote Access System 1500 (RAS 1500). It includes the 

following:

New Features ........................................................................2

MSCHAP V1, V2

Full Duplex Ethernet

File Compression

PAT (TCP and UDP) support for WAN Interface

NAT (Dynamic and Static) over WAN Interface

Web configurator support for WAN Interface

GSM

Operational Information ........................................................9

Visit the RAS 1500 Web Site (http://www.3com.com/ras1500) for the 
latest RAS 1500 product information, code, and documentation. On this 
site, you will also find a link to the 3Com Knowledgebase where you will 
find useful product tips and information posted by other RAS 1500 users.

ISDN Assistance

For assistance with Integrated Services Digital Network (ISDN) services in 
the U.S., call the 3Com Access Plus hot line, 1-800-367-3869.

When a similar service is available in Canada, information will be posted 
on the 3Com Support Web Site (http://support.3com.com).

For assistance with ISDN services in Latin America, contact your local 
phone company.

RelNotes2.5.fm  Page 1  Thursday, June 8, 2000  2:42 PM

Содержание 3C433279A













Отзывы: