AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1208 / 1248

User's Manual 1208 Document #: LTRT-10375
Mediant 500 MSBR
Broken Connection
Timeout
configure voip > sip-
definition settings >
broken-connection-
event-timeout
[BrokenConnectionEvent
Timeout]
Defines the timeout interval (in 100-msec units) after which a call is
disconnected if RTP packets are not received during an established call
(i.e., RTP flow suddenly stops during the call).
The valid range is from 3 (i.e., 300 msec) to approx. 2684354 (i.e., 74.5
hours). The default is 100 (i.e., 10,000 msec or 10 seconds).
Note:

The parameter is applicable only if the
DisconnectOnBrokenConnection parameter is configured to 1.

Currently, the feature functions only if Silence Suppression is
disabled.
configure voip >
sbc settings > no-
rtp-detection-
timeout
[NoRTPDetectionTimeou
t]
Defines the timeout interval (in msec) after which a call is disconnected
if RTP packets are not received. The timer begins from call setup and if
no packets have been received when the timer expires, the device
disconnects the call.
The valid range is 0-50000. The default is 0 (i.e., disconnects the call
immediately).
Note: If a call is established and RTP flow occurs, if at any stage during
the call RTP packets are not detected for a user-defined interval
(configured by BrokenConnectionEventTimeout), the device
disconnects the call (or routes it to an alternative destination, configured
by the IpProfile_DisconnectOnBrokenConnection).
Disconnect Call on
Silence Detection
configure voip > sip-
definition settings > disc-
on-silence-det
[EnableSilenceDisconne
ct]
Determines whether calls are disconnected after detection of silence.

[1] Yes = The device disconnects calls in which silence occurs (in
both call directions) for more than a user-defined time.

[0] No = (Default) Call is not disconnected when silence is detected.
The silence duration can be configured by the
FarEndDisconnectSilencePeriod parameter (default 120).
Note:

The parameter is applicable only to the Gateway application.

To activate the feature, enable Silence Suppression for the used
coder and configure the parameter FarEndDisconnectSilenceMethod
to 1.
Silence Detection Period
[FarEndDisconnectSilenc
ePeriod]
Defines the duration of the silence period (in seconds) after which the
call is disconnected.
The range is 10 to 28,800 (i.e., 8 hours). The default is 120 seconds.
Note:

The parameter is applicable only to the Gateway application.

For the parameter to take effect, a device reset is required.
Silence Detection
Method
[FarEndDisconnectSilenc
eMethod]
Determines the silence detection method.

[0] None = Silence detection option is disabled.

[1] Packets Count = According to packet count.
Note:

The parameter is applicable only to the Gateway application.

For the parameter to take effect, a device reset is required.