24 Ports Nway
Fast Ethernet Switch
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 2 and 15 of FCC Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference when the equipment is operated
in
a
commercial
environment.
This
equipment generates and radiates radio
frequency energy and, if not installed and
used in accordance with the user’s manual, it
may cause interference in which case users
will be required to correct interference at their
own expenses.
CE Warning
This is a Class B product.
In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
The Switch provides 24 10/100M ports.
It
was designed for easy installation and high
performance in an environment where traffic
on the network and the number of user
increase continuously.
The switch also provides automatic crossover
detection functionality on each port. It is
simple and friendly to up-link to another
switch without crossover cable.
The
rack-mount
size
was
specifically
designed for medium to large workgroups.
The Switch can be installed where space is
limited; moreover it provides smooth network
migration and easy upgrade to network
capacity. The 19” size can be rack-mount on
19” cabinet.
Key Features
Complies with the IEEE802.3 Ethernet, and
IEEE802.3u Fast Ethernet
24 Port 10/100M Nway (Auto-negotiation)
Switch
19” rack-mount size
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Store-and-forward operation support
Embedded 2.5 Mbits packet buffer
Provides 8K MAC address entry
Supports broadcast storm filtering
All ports provide Auto-Negotiation and Auto
-MDI/ MDI-X functions
Supports flow control: Back pressure for
Half-duplex and IEEE 802.3x for
Full-duplex mode
Smart plug & play
Package Contents
Before you start to install this Switch, please
verify your package contain the following
items:
One Fast Ethernet Switch
Rack-mount Kit for Rack Installation
One AC Power Cord
One User’s Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Front Panel (LEDs)
LED Indicators of 24
Ports 10/100M
Switch
LED
Status
Description
Power
On
Power on
LINK/ACT On
Port is for connection.
Off
No connection.
Flashing Data is transmitting or
receiving
10/100M
On
Port is on 100M status
Off
Port is on 10M status.
