AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 819 / 1248

Version 7.2 819 Mediant 500 MSBR
User's Manual 51. Automatic Provisioning
51.2.10.1 Automatic Update for Single Device
This simple example describes how to configure the Automatic Update feature for updating
a single device. In this example, the device queries the provisioning server for software,
configuration and Auxiliary files every 24 hours.

To set up Automatic Provisioning for single device (example):
1. Set up an HTTP Web server (e.g., http://www.company.com) and place all the
required configuration files on this server.
2. Configure the device with the IP address of the DNS server for resolving the domain
name (e.g., http://www.company.com) that is used in the URL of the provisioning
server.
3. Configure the device with the following Automatic Update settings:
a. Automatic Update is done every 24 hours (1440 minutes):
♦
ini File:
AutoUpdateFrequency = 1440
♦
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# update-frequency 1440
b. Automatic Update of software file (.cmp):
♦
ini File:
AutoCmpFileUrl = 'https://www.company.com/sw.cmp'
♦
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'
c. Automatic Update of Call Progress Tone file:
♦
ini File:
CptFileURL =
'https://www.company.com/call_progress.dat'
♦
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# call-progress-tones
'http://www.company.com/call_progress.dat'
d. Enable Cyclical Redundancy Check (CRC) on downloaded ini file:
♦
ini File:
AUPDCheckIfIniChanged = 1
♦
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# crc-check regular
4. Power down and then power up the device.