AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1234 / 1248

User's Manual 1234 Document #: LTRT-10375
Mediant 500 MSBR
RADIUS Accounting Type
configure voip > sip-
definition settings >
radius-accounting
[RADIUSAccountingType]
Defines at what stage of the call RADIUS accounting messages are
sent to the RADIUS accounting server.

[0] At Call Release = (Default) Sent at call release only.

[1] At Connect & Release = Sent at call connect and release.

[2] At Setup & Release = Sent at call setup and release.
AAA Indications
configure system > cdr >
aaa-indications
[AAAIndications]
Enables the Authentication, Authorization and Accounting (AAA)
indications.

[0] None = (Default) No indications.

[3] Accounting Only = Only accounting indications are used.
RADIUS User Authentication Parameters
Use RADIUS for
Web/Telnet Login
configure system > radius
settings > enable-mgmt-
login
[WebRADIUSLogin]
Enables RADIUS queries for Web and Telnet login authentication.
When enabled, logging into the device's Web and Telnet embedded
servers is done through a RADIUS server. The device communicates
with a user-defined RADIUS server and verifies the given username
and password against a remote database in a secure manner.

[0] Disable (default)

[1] Enable
Note:

For RADIUS login authentication to function, you must also
configure the EnableRADIUS parameter to 1 (Enable).

RADIUS authentication requires HTTP basic authentication, where
the username and password are transmitted in clear text over the
network. Therefore, it's recommended to set the HTTPSOnly
parameter to 1 to force the use of HTTPS, since the transport is
encrypted.
Password Local Cache
Mode
configure system > radius
settings > local-cache-
mode
[RadiusLocalCacheMode]
Defines the device's mode of operation regarding the timer (configured
by the parameter RadiusLocalCacheTimeout) that determines the
validity of the username and password (verified by the RADIUS
server).

[0] Absolute Expiry Timer = When you access a Web page, the
timeout doesn't reset, instead it continues decreasing.

[1] Reset Timer Upon Access = (Default) Upon each access to a
Web page, the timeout always resets (reverts to the initial value
configured by RadiusLocalCacheTimeout).
Password Local Cache
Timeout
configure system > radius
settings > local-cache-
timeout
[RadiusLocalCacheTimeo
ut]
Defines the time (in seconds) the locally stored username and
password (verified by the RADIUS server) are valid. When this time
expires, the username and password become invalid and a must be re-
verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default is 300 (5 minutes).

[-1] = Never expires.

[0] = Each request requires RADIUS authentication.
RADIUS VSA Access
Level Attribute
configure system > radius
settings > vsa-access-
level
[RadiusVSAAccessAttribu
te]
Defines the code that indicates the access level attribute in the Vendor
Specific Attributes (VSA) section of the received RADIUS packet.
The valid range is 0 to 255. The default is 35.
RADIUS Servers Table