AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 263 / 1248

Version 7.2 263 Mediant 500 MSBR
User's Manual 18. Services

To enable debugging of HTTP services:
1. Open the General Settings page ( Setup menu > IP Network tab > HTTP Proxy folder
> General Settings ):
Figure 18-47: Configuring Debug Level for HTTP Services
2. From the 'HTTP Proxy Debug Level' drop-down list, select one of the following:
•
No Debug: Disables debugging.
•
Basic: Enables debugging and sends basic information in the Syslog.
•
Detailed: Enables debugging and sends detailed information in the Syslog.
3. Click Apply .
18.6.3 Configuring HTTP Interfaces
The HTTP Interfaces table lets you configure up to 10 HTTP Interfaces. An HTTP Interface
represents a local, listening interface for receiving HTTP/S requests from HTTP-based
(Web) clients such as managed equipment (e.g., IP Phones) and/or AudioCodes EMS
management tool for HTTP/S-based services.
The following procedure describes how to configure HTTP Interfaces through the Web
interface. You can also configure it through ini file (HTTPInterface) or CLI (configure
network > http-proxy http-interface).

To configure an HTTP Interface:
1. Open the HTTP Interfaces table ( Setup menu > IP Network tab > HTTP Proxy folder
> HTTP Interfaces ).
2. Click New ; the following dialog box appears:
Figure 18-48: HTTP Interfaces Table - Add Dialog Box
3. Configure an HTTP Interface according to the parameters described in the table
below.
4. Click Apply , and then save your settings to flash memory.