AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 508 / 1248

User's Manual 508 Document #: LTRT-10375
Mediant 500 MSBR
Parameter Description
Note: If the P-Asserted-Identity header is present in the incoming
INVITE message, the value of the parameter is compared to the P-
Asserted-Identity URI host name (and not the From header).
Source Host Prefix
src-host-prefix
[PstnPrefix_SrcHostPrefi
x]
Defines the prefix of the URI host name in the From header of the
incoming INVITE message.
By default, no value is defined. To denote any prefix, use the asterisk
(*) wildcard.
Note: If the P-Asserted-Identity header is present in the incoming
INVITE message, the value of the parameter is compared to the P-
Asserted-Identity URI host name (and not the From header).
Destination Phone Prefix
dst-host-prefix
[PstnPrefix_DestHostPr
efix]
Defines the prefix or suffix of the called (destined) telephone number.
You can use special notations for denoting the prefix. For example,
[100-199](100,101,105) denotes a number that starts with 100 to 199
and ends with 100, 101 or 105. To denote any prefix, use the asterisk
(*) symbol or to denote calls without a called number, use the $ sign.
For a description of available notations, see Dialing Plan Notation for
Routing and Manipulation Tables on page 979.
By default, no value is defined.
The prefix can include up to 49 digits.
Destination Host Prefix
dst-phone-prefix
[PstnPrefix_DestPrefix]
Defines the Request-URI host name prefix of the incoming INVITE
message.
By default, no value is defined. To denote any prefix, use the asterisk
(*) wildcard.
Action
Destination Type
dst-type
[PstnPrefix_DestType]
Defines the type of Tel destination.

[0] Trunk Group (default)

[1] Trunk
Trunk Group ID
trunk-group-id
[PstnPrefix_TrunkGroupI
d]
Defines the Trunk Group ID to where the incoming SIP call is sent.
Trunk ID
trunk-id
[PstnPrefix_TrunkId]
Defines the Trunk to where the incoming SIP call is sent.
Note:

If both 'Trunk Group ID' and 'Trunk ID' parameters are configured in
the table, the routing is done according to the 'Trunk Group ID'
parameter.

To configure the method for selecting the trunk's channel to which
the IP call is sent, see the global parameter, ChannelSelectMode.
IP Profile
ip-profile-id
[PstnPrefix_ProfileName
]
Assigns an IP Profile to the call.
To configure IP Profiles, see Configuring IP Profiles on page 404.
Call Setup Rules Set ID
call-setup-rules-set-id
[PstnPrefix_CallSetupRu
lesSetId]
Assigns a Call Setup Rule Set ID to the routing rule. The device
performs the Call Setup rules of this Set ID if the incoming call matches
the characteristics of the routing rule. The device routes the call to the
destination according to the routing rule's configured action, only after it
has performed the Call Setup rules.