AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1007 / 1248

Version 7.2 1007 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
Internal SRV Table
configure network > dns
srv2Ip
[SRV2IP]
The table defines the internal SRV table for resolving host names into
DNS A-Records. Three different A-Records can be assigned to a host
name. Each A-Record contains the host name, priority, weight, and
port. The format of the ini file table parameter is:
[SRV2IP]
FORMAT SRV2IP_Index = SRV2IP_InternalDomain,
SRV2IP_TransportType, SRV2IP_Dns1, SRV2IP_Priority1,
SRV2IP_Weight1, SRV2IP_Port1, SRV2IP_Dns2, SRV2IP_Priority2,
SRV2IP_Weight2, SRV2IP_Port2, SRV2IP_Dns3, SRV2IP_Priority3,
SRV2IP_Weight3, SRV2IP_Port3;
[\SRV2IP]
For example:
SRV2IP 0 =
SrvDomain,0,Dnsname1,1,1,500,Dnsname2,2,2,501,$$,0,0,0;
For more information, see Configuring the Internal SRV Table on page
152.
74.2.6 DHCP Parameters
The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
Table 74-15: DHCP Parameters
Parameter Description
Enable DHCP
[DHCPEnable]
Enables DHCP client functionality.

[0] Disable (default)

[1] Enable
Note:

For the parameter to take effect, a device reset is required.

For a detailed description of DHCP, see DHCP-based Provisioning
on page 807.

The parameter is a "hidden" parameter. Once defined and saved to
flash memory, its value doesn't revert to default even if the
parameter doesn't appear in the
ini file.
[DHCP120OptionMode] Enables the acceptance of DHCP Option 120 in DHCP responses sent
by a DHCP server.

[0] = DHCP Option 120 is not supported and ignored if received in
the DHCP response.

[1] = (Default) DHCP Option 120 is supported and if received, the
device adds the SIP server information to the Proxy Set.
[DHCPSpeedFactor] Defines the device's DHCP renewal speed for a leased IP address from
a DHCP server.

[0] = Disable

[1] = (Default) Normal

[2] to [10] = Fast
When set to 0, the DHCP lease renewal is disabled. Otherwise, the
renewal time is divided by this factor. Some DHCP-enabled routers
perform better when set to 4.
Note: For the parameter to take effect, a device reset is required.