manualshive.com logo in svg

ADTRAN ATLAS 550, Системное руководство

ADTRAN ATLAS 550 - многофункциональное оборудование для передачи данных и голосовой связи. Устройство имеет различные настраиваемые опции, что обеспечивает высокую гибкость в сетевых приложениях. Бесплатное руководство пользователя можно скачать с помощью manualshive.com.

Поделиться
Скачать
background image

ATLAS 550 System Manual

Section 3  Network Turnup Procedure

61200305L2-1B

© 2004 ADTRAN, Inc.

53

4.

GROUNDING INSTRUCTIONS

The following provides grounding instruction information from the Underwriters’ Laboratory UL60950 
Standard for Safety of Information Technology Equipment Including Electrical Business Equipment, Third 
Edition, of December 1, 2000.

An equipment grounding conductor that is not smaller in size than the ungrounded branch-circuit supply 
conductors is to be installed as part of the circuit that supplies the product or system. Bare, covered, or 
insulated grounding conductors are acceptable. Individually covered or insulated equipment grounding 
conductors shall have a continuous outer finish that is either green, or green with one or more yellow 
stripes. The equipment grounding conductor is to be connected to ground at the service equipment.

The attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type, 
and the equipment grounding conductors serving these receptacles are to be connected to earth ground at 
the service equipment.

A supplementary equipment grounding conductor shall be installed between the product or system and 
ground that is in addition to the equipment grounding conductor in the power supply cord.

The supplementary equipment grounding conductor shall not be smaller in size than the ungrounded 
branch-circuit supply conductors. The supplementary equipment grounding conductor shall be connected 
to the product at the terminal provided, and shall be connected to ground in a manner that will retain the 
ground connection when the product is unplugged from the receptacle. The connection to ground of the 
supplementary equipment grounding conductor shall be in compliance with the rules for terminating 
bonding jumpers at Part K or Article 250 of the National Electrical Code, ANSI/NFPA 70. Termination of 
the supplementary equipment grounding conductor is permitted to be made to building steel, to a metal 
electrical raceway system, or to any grounded item that is permanently and reliably connected to the 
electrical service equipment ground.

The supplemental grounding conductor shall be connected to the equipment using a number 8 ring terminal 
and should be fastened to the grounding lug provided on the back panel of the equipment. The ring 
terminal should be installed using the appropriate crimping tool (AMP P/N 59250 T-EAD Crimping Tool 
or equivalent).

5.

MOUNTING OPTIONS

The ATLAS 550 unit may be used on a tabletop or installed in a 19-inch or 23-inch rackmount or 
wallmount configuration. ADTRAN includes 19-inch rackmount ears with the ATLAS 550 shipment 
(23-inch rackmount ears are sold separately). For a rackmount installation, the ATLAS 550 allows 
flush-face mount, face-forward mount, center mount, and rear mount. The rackmount ears may also be 
turned face down for wall mounting. When wall-mounted, the ATLAS 550 unit may be installed with 
either side up and the front and back panels facing sideways. 

Rackmounting the ATLAS 550

The ATLAS 550 is a rackmountable unit which can be installed into 19- or 23-inch equipment racks. (The 
ATLAS 550 ships with 19-inch rackmount ears installed; 23-inch rackmount ears can be ordered from 
ADTRAN - P/N 3265379-2@C). Follow these steps to mount the ATLAS 550 into a rack:

Содержание ATLAS 550





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ATLAS 550

Bartlett Genesis LT3140 Technical Manual preview
Genesis LT3140
Бренд: Bartlett Страницы: 5
Federal Signal Corporation ultravoice UV Installation, Operation And Service Manual preview
ultravoice UV
Бренд: Federal Signal Corporation Страницы: 79
Federal Signal Corporation PAGASYS GEN II Description, Installation, And User Manual preview
PAGASYS GEN II
Бренд: Federal Signal Corporation Страницы: 32
Radware Alteon Installation And Maintenance Manual preview
Alteon
Бренд: Radware Страницы: 98
Ezodo 4801P Manual preview
4801P
Бренд: Ezodo Страницы: 7
Sonos Controller CR100 Quick Setup Instructions Manual preview
Controller CR100
Бренд: Sonos Страницы: 12
Swagelok BSH 10 Series User Manual preview
BSH 10 Series
Бренд: Swagelok Страницы: 20
Watts WFHC 06Z 02 HC RF 24 User Manual preview
WFHC 06Z 02 HC RF 24
Бренд: Watts Страницы: 18
Texas Instruments Errata MSP430F6779 Manual preview
Errata MSP430F6779
Бренд: Texas Instruments Страницы: 27
CP Electronics AR-SG-4SM-W Product Manual preview
AR-SG-4SM-W
Бренд: CP Electronics Страницы: 12
Oomlout ARDX Experimenter'S Manual preview
ARDX
Бренд: Oomlout Страницы: 32
Vectornav VN-200 Quick Start Manual preview
VN-200
Бренд: Vectornav Страницы: 18
PTZOptics PT-JOY-G4 Quick Start Manual preview
PT-JOY-G4
Бренд: PTZOptics Страницы: 4
Jebao AQLink A1 Quick Start Manual preview
AQLink A1
Бренд: Jebao Страницы: 4
Furious FPV PIKO F4 User Manual preview
PIKO F4
Бренд: Furious FPV Страницы: 15
GS Chromalox 4081 Installation & Operation Manual preview
Chromalox 4081
Бренд: GS Страницы: 236
SECO-LARM ENFORCER SLI PR-B1124-PQ Additional Information preview
ENFORCER SLI PR-B1124-PQ
Бренд: SECO-LARM Страницы: 2
ULTRAFRYER Ultrastat 23 Programming Manual preview
Ultrastat 23
Бренд: ULTRAFRYER Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды