manualshive.com logo in svg

ADTRAN ATLAS 550, Системное руководство

ADTRAN ATLAS 550 - многофункциональное оборудование для передачи данных и голосовой связи. Устройство имеет различные настраиваемые опции, что обеспечивает высокую гибкость в сетевых приложениях. Бесплатное руководство пользователя можно скачать с помощью manualshive.com.

Поделиться
Скачать
background image

61200305L2-1B

© 2004 ADTRAN, Inc.

 63

USER INTERFACE GUIDE

Provides detailed descriptions of all menu options and configuration parameters available for the 
ATLAS 550.

This section of ADTRAN’s ATLAS 550 System Manual is designed for use by network administrators and 
others who will configure and provision the system. It contains information about navigating the VT100 
user interface, configuration information, and menu descriptions.

C

ONTENTS

Navigating the Terminal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   63

Terminal Menu Window  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   63
Navigating using the Keyboard Keys  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   65

Terminal Menu and System Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   67

Selecting the Appropriate Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67
Security Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   68

Menu Descriptions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   68

System Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   69
System Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   71
System Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   78
System Utility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   90
Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   99
Modules Menu (T1/PRI Network Interface Module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   101
Modules Menu (E1/PRA Network Interface Module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   108
Modules Menu (Modem Management Network Module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   113
Modules Menu (BRI DBU Network Interface Module). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   115
Modules Menu (Dual/Quad T1/PRI Option Modules) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   120
Modules Menu (Dual Nx56/64 Option Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   126
Modules Menu (Dual USSI Option Module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   133
Modules Menu (Quad Basic Rate ISDN (U Interface) Option Module) . . . . . . . . . . . . . . . . . . .   140
Modules Menu (Quad Basic Rate ISDN (S/T Interface) Option Module)  . . . . . . . . . . . . . . . . .   143
Modules Menu (Quad/Octal FXS Option Module). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   146
Modules Menu (Quad/Octal FXO Option Module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   150
Modules Menu (Octal E&M Option Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   154
Modules Menu (Legacy Data Option Module). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   158
Modules Menu (NxT1 HSSI and NxT1 HSSI/V.35 Option Modules). . . . . . . . . . . . . . . . . . . . .   160
Modules Menu (Ethernet Switch Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   170
Modules Menu (Resource Host Module). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   171
Modules Menu (VCOM Option Module)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   172
Modules Menu (32 Channel ADPCM Resource Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   178
Modules Menu (Nx 56/64 BONDing Resource Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   182
Packet Manager  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   185
Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   214
Dedicated Maps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   229
Dedicated Maps (T1/PRI Network or Dual/Quad T1/PRI Modules)  . . . . . . . . . . . . . . . . . . . . .   232
Dedicated Maps (E1/PRA Network Interface). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   233
Dedicated Maps (Quad/Octal FXS Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   235
Dedicated Maps (Quad/Octal FXO Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   237
Dedicated Maps (Dual Nx 56/64 Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   238
Dedicated Maps (Dual USSI Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   239
Dedicated Maps (Octal E&M Module). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   239

Содержание ATLAS 550





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ATLAS 550

GE PACSystems RX7i Cpu Programmer'S Reference Manual preview
PACSystems RX7i
Бренд: GE Страницы: 469
GE GuardSwitch 300 Series Instructions preview
GuardSwitch 300 Series
Бренд: GE Страницы: 2
GE GuardSwitch 300 Series Instruction preview
GuardSwitch 300 Series
Бренд: GE Страницы: 2
Samsung SSA-P400 User Manual preview
SSA-P400
Бренд: Samsung Страницы: 27
ECKELMANN VS 3010 BS Operating Instruction preview
VS 3010 BS
Бренд: ECKELMANN Страницы: 178
H3C WX Series Registration And Activation Manual preview
WX Series
Бренд: H3C Страницы: 17
H3C WX Series Getting Started Manual preview
WX Series
Бренд: H3C Страницы: 32
Lantronix xPico 200 Series Manual preview
xPico 200 Series
Бренд: Lantronix Страницы: 7
Lantronix xPico 110 Quick Start Manual preview
xPico 110
Бренд: Lantronix Страницы: 3
Lantronix EDS1100 Quick Start Manual preview
EDS1100
Бренд: Lantronix Страницы: 15
tbs electronics Omnicharge Solar OCS 100-20 Installation Manual preview
Omnicharge Solar OCS 100-20
Бренд: tbs electronics Страницы: 64
NXP Semiconductors AN10815 Application Note preview
AN10815
Бренд: NXP Semiconductors Страницы: 20
L&L KILNS ONE-TOUCH Operation preview
ONE-TOUCH
Бренд: L&L KILNS Страницы: 12
QSC TSC-101-G3 User Manual preview
TSC-101-G3
Бренд: QSC Страницы: 13
Danfoss EKC 331T Instructions Manual preview
EKC 331T
Бренд: Danfoss Страницы: 12
MAC3 Sensopress LCD User Manual preview
Sensopress LCD
Бренд: MAC3 Страницы: 20
Aeotec GEN5 Instructions preview
GEN5
Бренд: Aeotec Страницы: 2
SMC Networks ITV1050 Installation And Maintenance Manual preview
ITV1050
Бренд: SMC Networks Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды