VeEX MPA, User Manual

Page: 745 / 842

Protocol Tabs
745
Settings Reports the Stream Settings for the selected Port.
Statistics Reports all Steam Tx/Rx Packet counts, Errors, and Alarms.
Events Reports a summary of Events, such as alarm and error activity.
Serv Disrupt Reports Service Disruption statistics.
RFC Thru Put Reports the Throughput test settings and a summary of the test
results for each packet size (passing rate, transmitted and
received packets, minimum/maximum/average latency).
RFC Frame Loss Reports the Frame Loss test settings and a summary of the test
results for each packet size (passing rate, transmitted and
received packets, minimum/maximum/average latency).
RFC B2B Burst Reports the Back to Back Burst test settings and a summary of
the test results for each packet size (Max Possible Number of
Frames, and Average Observed B2B Frames).
RFC Combined Combines the RFC Thru Put, RFC Frame Loss and RFC B2B
Burst reports into one report.
To save or print test results:
1. Configure and run Packet Stream transmissions or perform an RFC-2544 test.
2. Select the Report common function button located at the bottom of the screen.
The Report Setup dialog box appears.
3. Select the Destination Printer or File type. The following report Destinations are
available:
MPA_e_manual_D07-00-129P_RevA00