VeEX MPA, User Manual

Page: 564 / 842

Packet Tab
564
Frame Lengths, as shown in Table 1.
When editing the Frame Size for each Service #, use the
Prev/Next buttons at the bottom of the Traffic Stream Profile
window to change to the previous or next Service # (Stream
ID #), then select Save All to save all of the edited Services at
one time.
Service # Frame Size (bytes)
Service 01 64
Service 02 128
Service 03 256
Service 04 512
Service 05 1024
Service 06 1280
Service 07 1518
Service 08 MTU
Service 09 User Defined (Optional)
Service 10 User Defined (Optional)
Table 1
– Recommended Frame Sizes/Lengths for each Service
Number
Max Frame Loss Allows the user to configure the selected Service's Maximum
Frame Loss Pass/Fail threshold rate, for both the
Configuration tests and the Performance test.
The Max Frame Loss rate can be set from 0.00% to
99.0%, per Service.
If the measured Frame Loss% exceeds this value while
testing the selected Service, then Configuration Test Results
Status will show "FAIL" for that Service.
Max Jitter Allows the user to configure the selected Service's Maximum
Packet Jitter Pass/Fail threshold, in µsec.
The Max Jitter can be set from 0 to 100000, per Service.
If the measured Jitter exceeds this value while testing the
selected Service, then Configuration Test Results Status will
show "FAIL" for that Service.
MPA_e_manual_D07-00-129P_RevA00