VeEX MPA, User Manual

Page: 537 / 842

Protocol Tabs
537
IP Dest address Sets the IP address of the destination.
For IPv4 , the address is entered in decimal notation using a
keypad. There are no restrictions on values entered but the
format must be correct, i.e: (
0-255
.
0-255
.
0-255
.
0-255
).
If three digits are entered in a field, a period will be
automatically added.
If only one or two digits are entered, you must enter a period
manually.
For IPv6 , the address is entered in hexadecimal notation using a
keypad. There are no restrictions on value entered but the format
must be correct, i.e: (
0-FFFF
:
0-FFFF
:
0-FFFF
:
0-FFFF
:
0-FFFF
:
0-
FFFF
:
0-FFFF
:
0-FFFF
).
If four digits are entered in a field, a colon will be automatically
added.
If only less than four digits are entered, you must enter a colon
manually.
IP Mode Sets the IP version ( IPv4 or IPv6 ) used for the Stream's
configuration.
Ether Type A two-octet field in an Ethernet frame, used to indicate which
protocol is encapsulated in the payload.
The following menu items are available:
•
Internet Protocol, Version 4 ( IPv4 ) 0x0800 (* default
value)
•
Internet Protocol, Version 6 ( IPv6 ) 0x086DD
•
MPLS 0x8847
•
User defined (0x0 to FFFF)
UDP Src port Selects a User Data Protocol source port number (0 to 65535).
UDP Dest port Selects a User Data Protocol destination port number (0 to
65535).
Port 0 is an officially reserved port in TCP/IP networking, and
should not be used.
MPA_e_manual_D07-00-129P_RevA00