VeEX MPA, User Manual

Page: 422 / 842

SDH Tab
422
is the Transmit Default button setting.
(1011) SD-R Signal degrade (Ring), Bit pattern (1011)
(1100) SF-S Signal fail (Span), Bit pattern (1100)
(1101) FS-R Forced switch (Ring), Bit pattern (1101)
(1110) FS-S Forced switch (Span), Bit pattern (1110)
(1111) LP-S Lockout of protection (Span), Bit pattern
(1111). This is also the Transmit Illegal button
setting.
K1 Bits 5-8 (Ring Mode)
This function edits the last four bits of the K1 byte. When APS commands are
configured for Ring mode, these bits contain the Destination Code Identification.
The following options are available:
Options Description
Null (#0) Protection channel requesting switch action.
The protection channel is supplied with a signal
containing valid Transport Overhead for
carriage of the APS bytes and BIP-8, Bit
pattern 0000.
#1 Channel 1 requests switch action, Bit pattern
0001
#2 Channel 2 requests switch action, Bit pattern
0010
#3 Channel 3 requests switch action, Bit pattern
0011
#4 Channel 4 requests switch action, Bit pattern
0100
MPA_e_manual_D07-00-129P_RevA00