Protocol Tabs
665
Use the
Graph
button to view error and alarm results for the selected protocol
processor. Graphs show the test history for either the current test or a previously saved
test.
To use the graphs function:
1. Select a protocol processor that has been configured for Error Alarm testing.
2. From
Results
, select
Graph
. The Graph screen appears. It contains two graphs
which allow you to display incoming alarms and errors.
3. Use the following buttons to control graphing parameters:
•
Sample Rate
- Sets the timing for graph results at increments of 1
Second, 1 Minute, or 15 Minutes.
•
Change Scale
- Compresses or expands the displayed time scale for the
graphed errors and alarms at time intervals of 30 minutes, 90 minutes, 3
hours, 6 hours, 12 hours, 24 hours, or 72 hours.
•
Change Upper
- Sets the type of errors or alarms that appear in the upper
graph.
•
Change Lower
- Sets the type of errors or alarms that appear in the lower
graph.
•
- Adjusts the graph's time scale to an earlier or
later time.
•
- Prints a graph report to printer or file.
•
- Saves a graph to file as a .grp file that can be replayed at
a later time.
Important: This is not a text file; when replayed, it appears as the
original graph plot. Choose
Print a Graph to Report
if you desire graph
information that can be printed out.)
•
- Replays or stops saved graph (.grp) files.
Shift Left and Shift Right
Use these buttons to adjust the graph's time scale to an earlier or later time.
•
Selecting
Shift Left
moves the graph's reference cursor to the left and displays
earlier events.
•
Selecting
Shift Right
move the graph's reference cursor to the right and displays
later events.
You may also adjust the graph's time scale by using your finger and dragging the
reference cursor to the desired time scale. As you drag the reference cursor, the Track
Time field will reflect the period of time you are selecting and displays the errors and
alarms that occurred during that time. An example of an SDH graphing results is shown
below.
MPA_e_manual_D07-00-129P_RevA00
Summary of Contents for MPA
