VeEX MPA, User Manual

Page: 643 / 842

Protocol Tabs
643
%BW Percentage of bandwidth selected on that stream
WWN Dest Destination World Wide Name address
Payload Payload Pattern selected
Length Frame Length
SEQ_ID Sequence Identifier selected
F_CTL
Frame Control address
D_ID Destination Identifier address
OX_ID Originator Exchange ID address
WWN Src Source World Wide Name address
S_ID
Source Identifier address
RX_ID
Responder Exchange Identifier address
R_CTL
Routing Control address
Config - Traffic Stream Profile
(Specifically for Fibre Channel SAN testing on the Packet tab)
A frame stream's profile defines the size, content, and several addresses, and other
parameters for the frame.
The Traffic Stream Profile dialog box is used to set the stream profile parameters. To
access this dialog box, select stream #1 in the Stream Profile Table.
The Fibre Channel Class of Service is set to 3 by default.
Parameter Description
WWN SRC
ADDRESS Sets the World Wide Name Source Address.
Important: This value must be set before a Fabric & Name
Server login is attempted
MPA_e_manual_D07-00-129P_RevA00