VeEX MPA, User Manual

Page: 764 / 842

Misc Screen
764
The Chassis Clock setting is used to configure the timing source for all test ports in the
MPA chassis to the specified External-clock or to the Internal-clock, with various clock-
out options. Also, each test port in the chassis can independently use a
recovered/looped timing mode.
By default, the transmitted signals default to an Internal clock with no output.
To set the chassis clock:
1. Connect an External clock reference to either the SCM-
210’s
RJ-48 or SMA
Clock In/Out Ports.
2.
Remotely log into to the MPA’s IP Address with the Remote Client software.
3. Select the System tab and choose Misc .
4. Select Chassis Clock . The Chassis Clock dialog box appears.
5. Select one of the following External or Internal clock reference options.
MPA_e_manual_D07-00-129P_RevA00