VeEX MPA, User Manual

Page: 517 / 842

Protocol Tabs
517
2. Choose the Report type(s) to be printed or saved.
The most common report is the Statistics report, which contains a complete list of
error and alarm statistic information as well as other counts that pertain to the test
performed.
Multiple reports can be combined into one file by selecting more than one report type.
The reports listed below are only available for the SDH protocol processor.
Settings Reports the Stream Settings for the selected Port.
Statistics Reports all Steam Tx/Rx Packet counts, Errors, and Alarms.
Events Reports a summary of Events, such as alarm and error activity.
APS Reports the K1/K2 byte sequences results summary.
Performance Reports the Performance Monitoring results.
Capture Reports the results from an overhead byte capture test
Serv Disrupt Reports Service Disruption statistics.
RTD Reports the Round Trip Delay measurements.
Module Info Reports the SFP Module Information.
Only supported on the MPM-10G card, see the MLD tab for other
card types.
** Module Not Present ** is shown when laser module is not
inserted.
3. Select the Destination Printer or File type. The following report Destinations are
available:
Printer The selected report is sent to your PC's default printer.
Text File The selected report is saved as an ASCII text file, with a .txt file
extension.
Delimited The selected Settings or Statistics report is save as a text file, using
MPA_e_manual_D07-00-129P_RevA00