VeEX MPA, User Manual

Page: 310 / 842

SONET Tab
310
monitoring such as error counts and error rates.
TC-IEC-P Generates a Tandem Connection Incoming Error Count over
the Path layer. A TC-IEC is a count of B3 errors received by
TCM equipment at the far end. Bits 1-4 of the Z5 byte are the
IEC bits.
Only appears when the TC Overhead Processing is
configured for " Path Enable ".
TC-REI-P Generates a Tandem Connection Remote Error Indicator
over the Path layer between TCM equipment. Bit 5 of the Z5
byte is used for this error.
Only appears when the TC Overhead Processing is
configured for " Path Enable ".
TC-OEI-P Generates a Tandem Connection Outgoing Error Indicator
over the Path layer between TCM equipment. Bit 6 of the Z5
byte is used for this error.
Only appears when the TC Overhead Processing is
configured for " Path Enable ".
TC-BIP-V Generates a Tandem Connection Bit Interleaved Parity error
over the VT layer. Bits 1-2 of the Z6 byte are the BIP bits.
Only appears when the TC Overhead Processing is
configured for " VT Enable ".
TC-REI-V Generates a Tandem Connection Remote Error Indicator
over the VT layer between TCM equipment. A TC-REI-V is a
count of TC-BIP-V errors received by TCM equipment at the
far end. Bit 5 of the Z6 byte is used for this error.
Only appears when the TC Overhead Processing is
configured for " VT Enable ".
TC-OEI-V Generates a Tandem Connection Outgoing Error Indicator
over the VT layer between TCM equipment. Bit 6 of the Z6
byte is used for this error.
Only appears when the TC Overhead Processing is
configured for " VT Enable ".
MPA_e_manual_D07-00-129P_RevA00