VeEX MPA, User Manual

Page: 674 / 842

Packet Tab
674
•
Test Paused: This LED will turn Red if the Pause Test button has been selected.
Any errors or alarms received while the test is paused will not be recorded in any
of the Results statistics.
•
All Tests: Provides a shortcut to the All Test Status screen (located under the
System tab) which shows a general status summary of all circuit packs installed
in the unit.
Quick Status LEDs Color Description
Typically a Red LED indicates a problem, whereas a Green or White LED indicates
error-free operation.
•
If an LED if White or Green and the LED's Text is White , then that Error or
Alarm condition has not occurred at any time during the current test.
•
If an LED if White or Green but the LED's Text is Red , then that Error or Alarm
condition was active at some point during the current test's history.
•
If an LED and the LED's Text are both Red , then that Error or Alarm condition is
currently active.
Quick Status Area LED's that are underlined are "Summary Status" LEDs and can
be selected to display a summary pop-up window to show the individual LEDs ,and
sometimes error/alarm statistics, related to that status LED.
The following status indicators and LEDs are displayed in the LED Quick Status Area
and the Large LED Results screen.
Indicator, LED or Control Description
LOS
Loss of Signal. When red, indicates that
a valid signal is not being received. This
is an alarm LED.
LINK STATE Indicates the port's connection status. If
green, the port is receiving a valid
signal.
CODE Indicates a line code error was detected
on the incoming frame.
DISPARITY
Indicates an error in the frame's
Ordered Set Disparity
MPA_e_manual_D07-00-129P_RevA00