VeEX MPA User Manual Download Page 232

Page: 232 / 842

OTN Tab

232

ODU-n Selected

ODU-n Selected

. This button toggles the Add/Drop ODU

LEDs, A/D OH bytes, and Settings between the ODU-n levels.

This button is only displayed when configured for a multi-

level ODTU Add/Drop mapping.

Add/Drop OTU

Add/Drop Optical Transport Unit

. Indicates if the Add/Drop

mapping is detecting any OTU Section Monitoring alarms such
as LOF, OOF, LOM, or OOM. This is a Summary LED.

This LED is only displayed when configured for a multi-level

or multi-channel ODTU Add/Drop mapping.

If this LED is red, click the LED text (Add/Drop OTU) to

display a detailed LED window with all of the Add/Drop OTU
alarms.

Multi-Chan

Multi-Channel Add/Drop

. This is a Summary LED that

indicates if an error or alarm has been detected on any of the
multi-channel ODTU Add/Drop channels.

This LED is only displayed when configured for a multi-

channel ODTU Add/Drop mapping.

Add/Drop ODU

Add/Drop Optical Data Unit

. Indicates current error, alarm,

and event activity for the Add/Drop ODU Path Monitoring. This
is a status LED.

LEDs in this section are only displayed when configured for

a multi-level or multi-channel ODTU Add/Drop mapping.

BIP8

Bit Interleaved Parity 8 (A/D ODU)

. This is an error LED.

BEI

Backward Error Indication (A/D ODU)

. This is an error LED.

MPA_e_manual_D07-00-129P_RevA00

Summary of Contents for MPA











































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MPA

Reviews:

Related manuals for MPA

Brands by name

Popular brands

VeEX MPA, User Manual

Search results

Summary of Contents for MPA

Reviews:

Related manuals for MPA

Brands by name

Popular brands