VeEX MPA User Manual Download Page 372

Page: 372 / 842

SONET Tab

372

This is an error LED.

TCM

Tandem Connection Status LED

. Indicates if a TCM error

or alarm has been detected.

If the TCM Summary LED is red, select the "TCM" text to

display the

TCM Summary LEDs

The TCM Summary LED only appears when

Error/Alarm Processing

is enabled in the Receive settings.

SSM

Signal Status Mismatch

- Displays when the expected SS

bits setting in the H1 byte do not match what is received. This
is an alarm LED.

SS Bits Alarm Reporting

must be enabled for this alarm to

occur.

SONET TCM Summary LED

The

TCM

summary LED indicates if a TCM error or alarm has been detected.

TCM (Tandem Connection Monitoring) is disabled by default, and must be enabled in

order to test for TCM errors and alarms. For SONET processors, the

TC Overhead

Processing

setting can be Enabled from the

Transmit

SET

SET 2

screen. If the

SONET processor is configured for a VT Mapping, then the

TC Overhead Processing

menu will allow you to choose between

Path Enable

VT Enable

Quick Status Area LED's that are underlined are "Summary Status" LEDs and can be

selected to display a summary pop-up window to show the individual LEDs, and
sometimes error/alarm statistics, related to that status LED.

•

If the TCM LED is red, select the "

TCM"

text to display to display a detailed LED

window with all of the SONET TCM errors and alarms.

•

The SONET TC LEDs window appears in the center of the screen.

MPA_e_manual_D07-00-129P_RevA00

Summary of Contents for MPA











































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MPA

Reviews:

Related manuals for MPA

Brands by name

Popular brands

VeEX MPA, User Manual

Search results

Summary of Contents for MPA

Reviews:

Related manuals for MPA

Brands by name

Popular brands