GETTING STARTED GUIDE
NI PXIe-5622
16-bit 150 MS/s Digitizer
This document explains how to install, configure, and test the NI PXIe-5622 (NI 5622). The
NI 5622 is a 150 MS/s digitizer with onboard signal processing (OSP). The NI-SCOPE
instrument driver ships with the NI 5622 and programs the device.
Note
Before you begin, install and configure your chassis and controller.
To access NI 5622 documentation, navigate to
Start
»
All Programs
»
National Instruments
»
NI-SCOPE
»
Documentation
.
Contents
Electromagnetic Compatibility Guidelines...............................................................................1
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Other Equipment....................................................................................................................... 3
Preparing the Environment....................................................................................................... 3
Installing the Software.............................................................................................................. 4
Installing the NI 5622............................................................................................................... 4
Configuring the Hardware in MAX.......................................................................................... 7
Programming the NI 5622.........................................................................................................8
Troubleshooting........................................................................................................................ 9
Why Is the ACCESS LED Off When the Chassis is On?.................................................9
What Should I Do if the NI 5622 Doesn't Appear in MAX?............................................9
What Should I Do if the Module Fails the Self-Test?.....................................................10
Thermal Shutdown Error................................................................................................ 10
Where To Go Next.................................................................................................................. 11
Worldwide Support and Services............................................................................................ 11
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
