Operating System Description
Windows XP
Select
Start
»
Control Panel
»
System
»
Hardware
»
Device
Manager
.
5.
If you are using a PXI or PXI Express controller, verify that a
National Instruments
entry appears in the system device list. Reinstall NI-SCOPE and the device if error
conditions appear in the list. If you are using an MXI controller, right-click
PCI-to-PCI
Bridge
, and select
Properties
from the shortcut menu to verify that the bridge is enabled.
What Should I Do if the Module Fails the Self-Test?
1.
Restart the system.
2.
Launch MAX, and perform the self-test again.
3.
Power off the chassis.
4.
Reinstall the failed module in a different slot.
5.
Power on the chassis.
6.
Perform the self-test again.
Thermal Shutdown Error
If you receive an over-temperature or thermal shutdown error and your device shuts down,
complete the following steps to re-enable your device:
1.
Power off the computer or chassis that contains the device.
2.
Reinstall the device and make any necessary adjustments to make sure that the device is
effectively cooled.
3.
Power on the computer or chassis.
Note
The thermal shutdown error is reported until the device has cooled to an
acceptable operating temperature and has been successfully reset.
For more information about cooling the device, refer to the
Maintain Forced-Air Cooling
Note to Users
included in your kit.
Related Information
on page 4
10
|
ni.com
|
NI PXIe-5622 Getting Started Guide
