VeEX MPA, User Manual

Page: 64 / 842

Common Function Buttons
64
To shut down the Processor from a Protocol Processor tab:
1. Select the Shut Down from the common function button row.
2. Select on of the two options
•
Shutdown
•
Reboot
Shutdown
1. When Shutdown is selected, a Shutdown window appears giving you the option
to select OK or Cancel .
2. Selecting OK will begin the shutdown process, which may take up to 30 seconds
or so.
3. The Remote GUI will automatically disconnect from the MPA unit, and close.
4. If your MPA unit has an
AM4022 Processor and MCH card combination, then at
this point the blue hot-swap LED on the AM4022 Processor will flash on/off in
short blinks while the processor is shutting down. Wait for the hot-swap LED to
turn solid blue before proceeding.
a. If your MPA unit has an SCM-210 card , then skip to step 6 .
5. Pull out the Unlock/Extraction handle (to the first stop position) on the MCH ,
and wait for its hot-swap LED to turn solid blue.
6. If your MPA unit has an SCM-210 card , then at this point the OLED display
screen will go blank and the green READY LED will turn off as the SCM-210
card's processor shuts down.
a. If your MPA unit has the AM4022 Processor and MCH card combination,
then skip to step 8 .
MPA_e_manual_D07-00-129P_RevA00