VeEX MPA User Manual Download Page 234

Page: 234 / 842

OTN Tab

234

For OTN, each ODU layer has its own TCM (Tandem Connection Monitoring)

overhead section consisting of six TCM fields (

TCM:1-TCM:6

), including multi-level and

multi-channel ODTU Add/Drop mappings.

Quick Status Area LED's that are underlined are "Summary Status" LEDs and can be

selected to display a summary pop-up window to show the individual LEDs, and
sometimes error/alarm statistics, related to that status LED.

•

If the TCM Summary LED is red, select the "

TCM Summary

" text to display a

detailed LED window with all of the OTN TCM errors and alarms for

TCM:1

TCM:6

•

The OTN TC LEDs window appears in the center of the screen.

The following describes the TCM LEDs that appear for each of the six TCM Fields

(

TCM:1-TCM:6

LED

Description

BIP-8

Bit Interleaved Parity-8 error, for the specified TCM field is
being received. This is an error LED.

BEI

Backward Error Indication, for the specified TCM field is
being received. This is an error LED.

BDI

Backward Defect Indication, for the specified TCM field is
being received. This is an alarm LED.

BIAE

Backward Incoming Alignment Error, for the specified TCM
field is being received. This is an alarm LED.

Test

OTN Test Screens and Functions

MPA_e_manual_D07-00-129P_RevA00

Summary of Contents for MPA











































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MPA

Reviews:

Brands by name

Popular brands

VeEX MPA, User Manual

Search results

Summary of Contents for MPA

Reviews:

Brands by name

Popular brands