Tektronix PHASER 380, Service Manual

Page: 5 / 346

Service Manual
v
Contents
1 General Information
Phaser 380 overview 1-2
Solid inks 1-3
Memory considerations 1-3
Print engine assemblies 1-4
Media sensing 1-12
The main board 1-13
Rear panel 1-14
Front panel 1-15
Specifications 1-16
Regulatory specifications 1-20
2 Installing the Printer and Drivers
Pre-install questions for customers 2-2
Unpacking 2-6
Inventory for printer 2-6
Setting up the printer 2-8
Cabling the printer 2-10
Connecting the printer to a Macintosh 2-10
LocalTalk connection to a Macintosh 2-10
Ethernet connection to a Macintosh 2-10
Connecting the printer to a PC 2-11
Direct connection to a PC 2-11
Networked connection to a PC using the printer’s Ethernet port 2-11
Connecting the printer to a workstation 2-11
Direct connection to a workstation 2-11
Networked connection to a workstation 2-11
Installing a SCSI hard disk drive on a Phaser 380 2-12
Connecting the optional CopyStation to the printer 2-13
Turning on the printer 2-14
Startup page 2-14
Configuration page 2-15
Driver and communication set up 2-22
Installing printer software for Macintosh 2-22
Setting up the Phaser 380 printer driver 2-23
Setting up the Apple LaserWriter 8 printer driver 2-23
Setting up the Phaser 380 GX printer driver 2-24
Installing a printer driver for Microsoft Windows 95 2-25
Installing printer software for Windows NT 4.0 2-27
Installing printer software for Windows NT 3.51 2-29
Installing printer software for Windows 3.1 2-31