Tektronix PHASER 380, Service Manual

Page: 267 / 346

Service Manual 8-61
Field Replaceable Unit Disassembly/Assembly
8
Maintenance tray guides
1. Power down the printer.
2. Open the front cover and remove the maintenance tray.
3.
For each maintenance tray guide, remove the E-ring securing the
white plastic maintenance tray lift arm to the maintenance tray guide.
4. For each maintenance tray guide, remove the three screws securing it
to the inside of the printer side frame. Remove the guide.
Reverse these steps to install the maintenance tray guides.
Tools required
■
Magnetic screwdriver
■
Needle nose-pliers
■
#2 Phillips tip
■
Small, flatblade screwdriver
Figure 8-39 Removing the maintenance tray guide
9661-38
Remove
3 screws
C-clip