Tektronix PHASER 380, Service Manual

Page: 42 / 346

2-4
Phaser 380 Color Printer
2
Installing the Printer and Drivers
The printer requires the following environmental conditions:
■
Temperature: 15 to 32
o
C (59 to 90
o
F)
■
Humidity: 10 to 80% relative humidity, non-condensing
■
Power: 115 VAC or 220 VAC. The printer requires about 12 amps of
current at power-up in 115 VAC mode; 6 A at 220 VAC mode.
■
Clearances: A space measuring 81 cm wide by 73 cm deep by 92 cm
high (32 ins. wide by 29 ins. deep by 36 ins. high). An unrestricted
space in front allows for enough clearance to install the paper tray.
The extra height is to install the ink sticks.
■
Weight support: 90 kgs (200 lbs.)
Weight support: 115 kgs (255 lbs.) with lower feeder installed
Driver software must be installed on the host computer to use the printer’s
fullest potential. A host computer must meet the following conditions:
Mac
■
Mac II, Performa, Centris, Quadra or PowerMac
■
Operating System 6.0.7 or later
■
4 Mbytes RAM
PC
■
IBM AT, PS/2 or compatible, with a 386 or later CPU, a 3.5-inch floppy
disk drive, and a hard disk drive, 2 Mbytes RAM, 2 Mbytes of hard
disk space
DOS systems
DOS 3.1 or later
An application that supports color PostScript or HP-GL
Windows systems
Windows 3.1
Windows 95
OS/2
Windows for Workgroups 3.11
Windows NT and Daytona