Tektronix PHASER 380, Service Manual

Page: 260 / 346

8-54
Phaser 380 Color Printer
8
Field Replaceable Unit Disassembly/Assembly
6. Remove the left E-clip securing the end of exit roller shaft. Remove
the left-end bushing, the right-end bearing from the shaft. Remove
the exit roller.
Reverse these steps to install the exit roller assembly.
Figure 8-34 Removing the exit roller
Exit roller drive
train assembly
Right-end bearing
Exit cover bushing
Left exit cover
bushing
Left end
bushing
C-clip
Exit roller assembly
I/O board 3
C-clips
Side cover
stand-off brace
9661-33