Tektronix PHASER 380, Service Manual

Page: 202 / 346

7-22
Phaser 380 Color Printer
7
Cleaning and Maintenance
5. Press the
Clean
button; a front panel message prompts you to remove
the upper media tray.
6.
Remove the upper media tray from the printer and the following
message appears:
Turn Lower Tray Rollers
Clean Cancel
7.
To clean the lower paper tray’s rubber transport rollers, place an
alcohol-soaked cleaning card into the slot provided on the top of the
Lower Paper Tray Assembly. Starting at the far left side of the printer,
push the cleaning card down into the slot until it contacts the rubber
transport rollers.
Note Guide marks molded into the Lower Paper Tray Assembly indicate the
left and right boundaries of the area to be cleaned.
8. While firmly holding the cleaning card against the rollers, press the
Clean
button on the front panel to turn the rollers. Each button press
turns the rollers several revolutions.
9.
After the printer turns the rollers several times, move the cleaning
card to the right to continue cleaning the lower transport rollers.
10. Repeat Steps 7 and 8 until all rollers have been cleaned. Press the
Exit
button and replace the media tray in the printer.
9662-81