Tektronix PHASER 380, Service Manual

Page: 209 / 346

Service Manual 8-3
Field Replaceable Unit Disassembly/Assembly
8
Lower Paper Tray Assembly
The Lower Paper Tray Assembly, sometimes referred to as the second feeder, is
serviced and replaced as a unit.
1.
Turn off the printer.
2. Unplug the Lower Paper Tray Assembly cable from the rear of the
printer.
3. Extend the four lifting handles from the underside of the printer.
Warning
The printer is heavy. Four people, one holding each handle, should
lift the printer in the next step.
4. Lift the printer off of the Lower Paper Tray Assembly.
Reverse these steps to reinstall the Lower Paper Tray Assembly making sure that
the printer is carefully and fully seated over the Lower Paper Tray Assembly's
guide pins.
Figure 8-1 Removing the Lower Paper Tray Assembly
9661-01