Tektronix PHASER 380, Service Manual

Page: 49 / 346

Service Manual 2-11
Installing the Printer and Drivers
2
Connecting the printer to a PC
Direct connection to a PC
1. Turn off the printer. Turn off the host computer.
2. Attach the parallel interface cable to the host computer; attach the
other end to the printer.
3. Turn on the printer first and then the computer.
Networked connection to a PC using the printer’s Ethernet port
In the Novell network, the printer is connected to the network in the same
manner as workstations using an Ethernet connection.
1.
Turn off the printer.
2. Connect the interface cable to the printer’s Ethernet connector.
3. Turn on the printer.
Connecting the printer to a workstation
Direct connection to a workstation
1. Turn off the printer. Turn off the host computer.
2.
Attach the parallel interface cable to the workstation; attach the other
end to the printer.
3. Turn on the printer and the computer.
Networked connection to a workstation
1. Turn off the printer.
2.
In the case of an Ethernet network, connect the interface cable to the
printer’s Ethernet connector.
3. Turn on the printer.