Tektronix PHASER 380, Service Manual

Page: 56 / 346

2-18
Phaser 380 Color Printer
2
Installing the Printer and Drivers
EtherTalk
printer type Indicates the type of printer installed at
the port. LaserWriter Any string of 32 character or
less.
EtherTalk zone Name assigned by the network
administrator for the zone the printer
is assigned to yes * Any string of 32 characters or
less.
EtherTalk
network The EtherTalk protocol address
assigned at boot time for routing. yes 0 Integer 1 through 65535
EtherTalk node Indicates the EtherTalk address of a
printer on a network. yes 0 Integer 1 through 65535
TokenTalk
interpreter Indicates the type of interpreter in use
at the port. yes PostScript
Level 2 Not installed, Disabled,
<interpreter>
Token Ring
Address A unique number for each printer.
based on the printer’s ID. yes None Any valid token ring address
Speed Data transmission speed the network
card is set to. Set by a jumper on the
card. (Jumper not installed equals
16 Mbps, jumper installed equals
4 Mbps). yes 16 Mbps 4 Mbps
Bridging Token Ring source routing. yes Adaptive (printer
determines route
based on data) Transparent (no source routing),
SourceRoute (use source
routing)
All Routes
Broadcast The printer sends response packets
back to the host indicating all possible
routes to the printer. yes False True
Connection
State Indicated if the printer is connected or
inserted into the token ring. yes Inserted No Cable, Cable connected,
Removed, Duplicated Address
Early Token
Release The printer releases the token at the
end of the last byte transmitted (not
applicable at 4 Mbps). yes On Off
Firmware
Version Firmware version of the printer’s Token
Ring network card. yes X.XX
Printer type Indicates the type of printer installed at
the port. LaserWriter Any string, 32 character or less
Zone Name assigned by network
administrator for the zone the printer
is assigned to. yes * Any string, 32 characters or less
Network Node Indicates the Token Ring address of
the printer on the network. yes 0 Integer assigned by network
NetWare port
interpreter Indicates the type of interpreters in use
at the port (Phaser 380 only). yes Auto Select Disabled, <interpreter>
Print server
name Name of the printer server. yes TEK01B009,
hardware-
dependent user-defined
Table 2-1 Configuration page settings (cont'd.)
Parameter Description Saved
in
NVRAM Default Limits or alternate choices