Tektronix PHASER 380, Service Manual

Page: 198 / 346

7-18
Phaser 380 Color Printer
7
Cleaning and Maintenance
Cleaning the upper pick roller manually
1. Remove the upper media tray from the printer.
2. Locate the media pick roller according to the following illustration.
3.
Using an alcohol-soaked cloth, wipe the pick roller to remove any
paper dust.
4. Replace the upper media tray in the printer.
Cleaning for lower tray jams: paper pick roller
If you are experiencing media feeding problems including mispicks and
multiple picks at the Lower Paper Tray Assembly tray, you can generally correct
the problem by cleaning the media-pick roller with isopropyl alcohol.
The printer guides you through the necessary steps to perform automatic
cleaning procedures. You will need the pick roller cleaning tray included in the
cleaning kit when you run the
Clean: Media Tray Jams
routine from the
printer’s front panel. You can also clean the media pick roller by hand using an
alcohol-soaked cloth; refer “Cleaning the lower pick roller manually” on
page 7-21.
1.
When the printer is on and the
Ready
message or the printer’s name
appears, press the
Clean
button. The printer displays the first
selection in the menu:
Clean:Light Stripes
<---- Clean Test
2. Press the left arrow
(<---)
button until the following message
appears:
Clean:Jam At Lower Tray
<---- Clean Test
Figure 7-16 Manually cleaning the upper pick roller
9661-153
Clean the upper
pick roller