Service Manual
8-55
Field Replaceable Unit Disassembly/Assembly
8
Lower feed roller assembly and lower feed roller electric clutch
1.
Turn off the printer and remove the power cord.
2.
Remove the right-side and left-side covers as explained in the earlier
topic, “Cabinet panels and covers” on page 8-4. Open the front cover.
3.
Remove the maintenance tray.
4.
Left side.
Disconnect the wiring harness leading from the clutch to
I/O board 1.
5.
At the electric clutch, remove the left-side E-clip securing the left end
of lower feed roller shaft.
6.
Remove the feed roller magnetic clutch.
7.
Right side.
Release the paper-pick’s wiring harness leading from the
feed roller assembly to I/O board 2.
8.
Remove the E-clip securing the right end of the lower feed roller shaft.
9.
Remove the bushing at each end of the lower feed roller shaft.
Remove the lower feed roller assembly.
Tools required
■
Magnetic screwdriver
■
Needle nose-pliers
■
#2 Phillips tip
■
Small, flatblade screwdriver
Summary of Contents for PHASER 380
