8-72
Phaser 380 Color Printer
8
Field Replaceable Unit Disassembly/Assembly
PostScript Code ROM SIMM
1.
Power down the printer. Leave the power cord plugged in to provide
a ground path for static discharges.
2.
Loosen the main board’s two rear panel securing screws.
3.
Slide out the main board.
4.
Remove the currently installed code ROM SIMM by spreading apart
the pawls securing each end of the SIMM in connector P71 ROM
SIMM. Remove the SIMM.
5.
Insert a replacement code ROM SIMM in connector P71 (
a
), and tilt
the SIMM down until it locks in place (
b
).
When properly inserted, a tab on each end of the connector slips into a
hole on each end of the code ROM SIMM. Also, a pawl on each end of
the connector latches around each end of the SIMM to lock it in place.
6.
Reinstall the card cage top and the rear cabinet panels.
7.
Reconnect the host interface cables. Turn on the printer and make a
test print.
Figure 8-48 Installing the PostScript code ROM SIMM on the main board
9661-46
a
b
Code
ROM
SIMM
Summary of Contents for PHASER 380
