Tektronix PHASER 380, Service Manual

Page: 57 / 346

Service Manual 2-19
Installing the Printer and Drivers
2
Configuration
file server Name of the configuring file server. yes null string user-defined
Login Password Indicates whether a network password
has been set. yes Not set Set
Queue Scan
interval Interval between successive queue
scans by the printer. yes 15 seconds An integer 1 through 3600 in
seconds
Network
Address Printer’s network number on the
Ethernet network; it is automatically
set when the printer is turned on. yes null string An 8 digit hex number 00000001
through FFFFFFFE
Ethernet frame
type How IPX packets are transmitted over
the network. yes Adaptive 802.3-X, DIX, 802.3-2,
802.3-2-SNAP
TCP/IP port
interpreter Indicates the type of interpreter in use
at the port yes Not authorized, Disabled
RARP/BOOTP Reverse Address Resolution
Protocol/Boot Parameter Protocol.
Used for setting the printer’s IP
address from a boot server. yes False True
IP Address The Internet Protocol address. If null,
the address will be set at run time via
RARP or BOOTP. yes Not Set String of 15 or fewer characters
of the format N.N.N.N followed
by the word “Dynamic” if IP
Address Dynamic parameter is
set to True.
Network Mask Indicates which fields of the IP
Address designates the network
portion and which designates the node
portion. If null, the mask will be
determined from the printer’s IP
address or the BOOTP or ICMP
(Internet Control Message Protocol)
Netmask Reply. yes Default String of 15 or fewer characters
of the format N.N.N.N
Broadcast
Address The IP Address used to broadcast
messages on the local network. If null,
the value will be determined from the
IP Address and Network Mask at run
time. yes Default String of 15 or fewer characters
of the format N.N.N.N
Gateway
Address(es) A list of addresses of the gateways to
other networks. yes None String of 15 or fewer characters
of the format N.N.N.N
Ethernet Frame
Type Data packet encapsulation type for
ARP (Address Resolution Display and
Control/RARP requests and IP
datagrams. yes DIX Adaptive, 802.2-SNAP, may be
followed by the word “Dynamic.”
LPR port
interpreter Indicates the type of interpreter in use
at the BSD system configured port
(Phaser 380 only). yes Not Authorized, Disabled, <null
string>
LPR Host
access list List of TCP/IP network addresses for
host access to printer. yes Unrestricted, only first 16
network addresses on list print
on the configuration page.
Table 2-1 Configuration page settings (cont'd.)
Parameter Description Saved
in
NVRAM Default Limits or alternate choices