Tektronix PHASER 380, Service Manual

Page: 46 / 346

2-8
Phaser 380 Color Printer
2
Installing the Printer and Drivers
Setting up the printer
Installing the printer is explained in detail in the Phaser 380 Color Printer User
Manual . The following is a brief list of the steps you follow to unpack and set up
the printer.
1. Remove the printer from its shipping box and place it in its working
location. If the Lower Paper Tray Assembly was also purchased, place
the Lower Paper Tray Assembly in the working location and then
install the printer on top of it.
2. Install the paper tray(s) in the printer.
3. Unlock the transit restraint lock on the right side of the printer.
4. Ensure that the power switch is off .
5. Plug the printer's power cord into the printer's AC receptacle. Plug
the other end into an appropriate AC power outlet.
Figure 2-2 Unlocking the transit restraint lock
9661-63
3
3