Service Manual
8-25
Field Replaceable Unit Disassembly/Assembly
8
Reverse these steps to reinstall the drum position sensor assembly. The drum
must be in the same position relative to the drum position encoder wheel when
the drum position sensor assembly was removed.
1.
If removed earlier, slide the drum bearing on the drum shaft.
2.
Place the retaining spring in the groove of the encoder wheel and
install the encoder wheel on the drum shaft, precisely aligning the
home flag to the alignment mark you drew on the shaft.
3.
Use the encoder wheel gap tool to properly space the encoder wheel to
the drum position sensor as explained in the procedure, “Drum
position encoder gap” on page 9-20.
Summary of Contents for PHASER 380
