Tektronix PHASER 380, Service Manual

Page: 199 / 346

Service Manual 7-19
Cleaning and Maintenance
7
3. Press the
Clean
button. A front panel message prompts you to install
the cleaning tray in the lower paper tray.
a.
Remove the lower paper tray from the printer. Remove all paper
from the paper tray.
b. Remove the cleaning tray from the cleaning kit and open the tray
lid to reveal the cleaning tray sponge.
c.
Wet the cleaning tray sponge with isopropyl alcohol; a bottle is
provided in the cleaning kit for dispensing the alcohol.
Alternately, you can squeeze the alcohol from two pre-soaked
alcohol wipe packets to moisten the cleaning tray sponge.
Caution
Do not use rubbing alcohol because it can contain water and oils
that leave undesirable residue on the printer parts. Never use
water
to clean the printer’s internal components. Failure to follow
these instructions may invalidate your printer’s warranty.
d.
Place the cleaning tray in the lower paper tray so that the tray’s
sponge pad is nearest the paper tray’s handle. Press the two tabs
underneath the cleaning tray into the two square notches provided
in the media tray.
e.
Insert the paper tray with the cleaning tray into the Lower Paper
Tray Assembly.
4. Press the
Clean
button. The printer cleans the paper-pick roller while
displaying the following message:
Cleaning
5. When the cleaning operation is complete, the following message
appears:
Remove Cleaning Tray
6.
Remove the paper tray from the printer.
7. Remove the cleaning tray from the paper tray.