Tektronix PHASER 380, Service Manual

Page: 195 / 346

Service Manual 7-15
Cleaning and Maintenance
7
1. When the printer is on and the
Ready
message or the printer’s name
appears, press the
Clean
button. The printer displays the first
selection in the menu:
Clean:Light Stripes
<---- Clean Test
2. Press the left arrow
(<---)
button until the following message
appears:
Clean:Jam At Upper Tray
<---- Clean Test
3. Press the
Clean
button. A front panel message prompts you to install
the cleaning tray in the media tray.
a. Remove the upper media tray from the printer. Remove all print
media from the media tray.
b. Remove the cleaning tray from the cleaning kit and open the tray
lid to reveal the cleaning tray sponge.
c. Wet the cleaning tray sponge with isopropyl alcohol ( A ); a bottle is
provided in the cleaning kit for dispensing the alcohol.
Alternately, you can squeeze the alcohol from two pre-soaked
alcohol wipe packets to moisten the cleaning tray sponge (
B
).
Caution Do not use rubbing alcohol because it can contain water and oils
that leave undesirable residue on the printer parts. Never use
water
to clean the printer’s internal components. Failure to follow
these instructions may invalidate your printer’s warranty.
Figure 7-13 Preparing the cleaning tray
9661-149
A B
90%
Isopropyl
alcohol