Tektronix PHASER 380, Service Manual

Page: 171 / 346

Service Manual 6-31
Troubleshooting
6
Once you select a test suite, the individual tests of that suite are
displayed.
3. Press the space bar to select or deselect a test. You can select as many
tests as you like.
4.
Once selected, press Ctrl-R to start the test(s). Depending on the test,
a screen may be displayed to modify how the tests run.
The solenoid test, shown above, allows you to selectively actuate a printer
solenoid as well as the drum fan. After the test runs, a summary of the test
results is displayed.
Figure 6-6 The Individual test within a selected test suite
Figure 6-7 Running a test