q
Check off the box after each Step is completed.
1.
q
Remove all paper and the clear plastic Printer
Output Tray in front of the paper tray. (See Figure 1)
2.
q
Insert approximately a ¼ inch thick stack of
20 lb. paper (measure it) into the Paper Tray.
3.
q
Insert the Feed Roll Cleaning Pad (provided in
Kit) in front of the paper stack (Long-Edge-Down) with
the green side (coarse side) facing out.
Page 1 of 2
NOTE:
Good lighting is required in order to
see inside the
WorkCentre 450
c
/ 450
cp
F
ü
CUSTOMER SELF SERVICE
Figure 1. Inserting the Feed Roll Cleaning Pad
into the Paper Tray
Step 1
:
Remove all
paper and the
clear plastic
Printer Output
Tray
Bottom of
Paper Tray
Printer Output
Tray
Step 2
:
Insert approximately a ¼
inch thick stack of paper
into the Paper Tray and
insert the Feed Roll
Cleaning Pad in front of the
paper stack with the green
side facing out
¼ inch Paper
Stack
Feed Roll
Cleaning Pad
with the green
side facing out
3 Feed Rolls are in
front of the Pad
(continued)
Xerox -
DOCUMENT
WorkCentre
450
c
/ 450
cp
Feed Roll Cleaning Kit
The purpose of the instructions is to provide a step by step procedure to
correct a paper feed problem.
Read all
the instructions before performing this procedure.
CUSTOMER PREPARATION:
•
Unpack the repair kit and read the Repair Instructions.
Contents of kit:
•
Feed Roll Cleaning
Pad
•
Repair Instructions
DRB-FILE
709P00850 Rev A
March 2000
